What furniture is falling apart quickly

Very often the appearance of furniture is very deceiving, especially when it is new and flaunts in stores. However, there are frequent cases when, after only a few months, the upholstery deteriorates near the expensive sofa, and the drawers of the table or cabinet cease to close properly. As a result, it turns out that from that beautiful sample that you just bought, there is no trace left. There are a number of details, paying attention to them when buying, allow you to recognize the tricks of the manufacturer, which reduced the cost of its production, and because of which the quality of the product was affected.

/

Quality of fastenings and joints

If there are accessories in the places of fastenings, then such products will last you much longer. The use of nails in modern furniture production is simply unacceptable, they have long been replaced by Euroscrews, but, apparently, not all manufacturers are aware of this.

/

Using accessories allows you to make the product much stronger, there should be no gaps between it and the material. If they are, then it is better to refuse the purchase. The surface at the attachment point should not have any deformation or dents.

instagram viewer

/

There should not be any rough edges at the joints, everything should be even and smooth, without traces of glue and gaps. It is enough to use an ordinary toothpick, if it goes butt, it is better to refuse to buy such furniture, it will become unusable very quickly.

/

Upholstery and filler of upholstered furniture

Before you buy a sofa for yourself, be sure to decide for what purpose it will be used. If as a berth, then the upholstery should be made of natural materials and fibers. If the upholstery will have a pattern, then it will retain its attractive appearance longer.

/

Impregnation of the upholstery will help to further protect the fabric from moisture, dirt, dust, and also from abrasion. Be sure to study the certificate for furniture, a good upholstery will have high wear resistance, abrasion should be at least 20 cycles. Moreover, find such information in the product passport, and not according to the seller.

/
OLYMPUS DIGITAL CAMERA

If you often sleep on the couch, it is better to choose a latex filler, it is tough and strong. For the use of such furniture for other purposes, the filler may be any.

/

When choosing a metal frame, try to give preference to welded models, rather than those that are fastened together by ordinary bolts. A wooden frame made of walnut or oak will be very durable, but it will also have a higher cost.

/
/
  • What wallpapers are the best in terms of price - qualityWhat wallpapers are the best in terms of price - quality
  • What finishing materials can you save onWhat finishing materials can you save on
  • Which floor wears out the fastestWhich floor wears out the fastest
  • Which bath is better? Made of cast iron, steel or acrylic?Which bath is better? Made of cast iron, steel or acrylic?
  • Cassette ceilings in the interior: types, advantagesCassette ceilings in the interior: types, advantages
  • What to do with the remnants of building materialsWhat to do with the remnants of building materials
  • How to choose a ceiling plinthHow to choose a ceiling plinth
  • Eaves for curtains: types, features of useEaves for curtains: types, features of use
  • Which wood floor is betterWhich wood floor is better
  • Textured wallpaper in the interiorTextured wallpaper in the interior
  • How to choose a vinyl laminateHow to choose a vinyl laminate
  • Which tile adhesive is better?Which tile adhesive is better?

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
When is it better to abandon natural wood

When is it better to abandon natural woodMaterials

Wood is a lively and moody material, which is often used in construction and repair work, as it has a high level of environmental friendliness, as well as an elegant appearance. The peculiarity of...

Read More
When sandwich panels cannot be used in construction

When sandwich panels cannot be used in constructionMaterials

More recently, sandwich panels have become quite a popular material in construction. Of these, you can easily erect trade stalls, an industrial premises, large shops. Moreover, work can be done at...

Read More
Using cabinet furniture helps save time and space.

Using cabinet furniture helps save time and space.Materials

Choosing different types of furniture, many do not even think about how it can be. Everything is familiar with the words cabinet furniture and built-in. Everything is really simple, cabinet is wha...

Read More