Enamelled sink for the kitchen: tips for choosing

The most important three items in any kitchen are a refrigerator, stove and sink. The latter is especially acutely aware of all the processes that occur in the kitchen, because cold water, boiling water, dirty dishes, including greasy, numerous household chemicals, get there. In this case, the sink must have increased strength, otherwise it will become unusable very quickly.

/

In addition to durability, the appearance of the product is also important, because every housewife wants her kitchen to be comfortable and attractive.

/

The most popular kitchen sinks are stainless steel products, more expensive samples are made of artificial stone, but about enameled sinks, for some reason, many began to forget, but after all, they were the most common.

/

Benefits of Enamelled Sinks

First of all, it should be noted the durability of this product, with proper care, it will last at least a couple of decades. Enamelled washing is also the most budget option that is available on the market, it costs quite inexpensively. Thanks to enamel, corrosion does not appear, and yet it is well resistant to numerous temperature extremes. Due to the variety of colors and shapes, you can choose a model that is suitable for your kitchen.

instagram viewer

/

What to consider when buying

Regardless of which shell material you decide to choose, it is first and foremost important to consider its depth. Remember that you will have to wash here not only plates and cutlery, but also pots, so you should be comfortable. The deeper the sink is, the smaller and there will be spray around it when washing dishes.

/

The width will largely depend on the size of your kitchen, and also on how actively you will use your sink. You can choose models with two bowls, it is very convenient when organizing kitchen processes.

/

In the store, in addition to the shape, size and number of bowls of an enameled sink, you should also pay attention to its quality. Carefully inspect the enamel, it should not have even the slightest chips. The enamel layer should be quite thick and uniform, otherwise, when any chips appear, rust will also appear very quickly, and this will significantly reduce the product's service life.

/

When choosing a shade, consider the design of your kitchen, as well as the color of the apron or work area, in which case your sink will look especially harmonious.

/
/
  • Where a cheap substandard corrugated board is useful in constructionWhere a cheap substandard corrugated board is useful in construction
  • What are the disadvantages of expanded clay as a heaterWhat are the disadvantages of expanded clay as a heater
  • What is the difficulty of gluing fiberboard to the wallsWhat is the difficulty of gluing fiberboard to the walls
  • What are the disadvantages of a polycarbonate roofWhat are the disadvantages of a polycarbonate roof
  • Which foam block is not suitable for building a houseWhich foam block is not suitable for building a house
  • Which windows are better: plastic or woodenWhich windows are better: plastic or wooden
  • Why is marmoleum the best flooring?Why is marmoleum the best flooring?
  • Why penetrating waterproofing the basement from the inside is not doneWhy penetrating waterproofing the basement from the inside is not done
  • Than latex foam is better than other construction foamThan latex foam is better than other construction foam
  • In some cases, you can not add waste oil to bitumenIn some cases, you can not add waste oil to bitumen
  • Why you should not replace the ondulin brand horse with a metal oneWhy you should not replace the ondulin brand horse with a metal one
  • What to choose - pressed fittings or crimpWhat to choose - pressed fittings or crimp

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
TOP 10 foam manufacturers

TOP 10 foam manufacturersMaterials

Contents TOP 5 global manufacturers SOUDAL( Belgium) PENOSIL( Estonia) Dr. Schenk( Germany) Illbruck( Germany) Kim Tec( Germany) TOP 5 Russian manufacturers ...

Read More
14 tips on choosing plastic windows

14 tips on choosing plastic windowsMaterials

Contents №1.Construction of plastic windows №2.What should be the profile? №3.The thickness and width of the profile №4.The number of air chambers profile №5.The number of c...

Read More
Tips for arranging tracks in the greenhouse with their own hands( 13 design options)

Tips for arranging tracks in the greenhouse with their own hands( 13 design options)Materials

Contents Arrangement of beds and paths in the greenhouse Arrangement of paths in the greenhouse How to make paths in the greenhouse( review of materials) 1. Tracks from gra...

Read More