10 secrets from the masters of laying laminate in the piggy bank for beginners

More and more people are choosing laminate flooring for repairs. This can be explained by the fact that the laminate is practical, reliable and easy to care for.

/
/
/

It is not only a specialist who can lay the laminate. Knowing the rules of styling, anyone can do this job. Here are 10 secrets from laminate flooring masters:

  1. To prevent the floor from creaking, lay the laminate on a concrete screed. Therefore, the previously old flooring must be removed.
  2. A prerequisite for success is dryness and cleanliness. It is advisable to vacuum the surface on which the new floor will be.
  3. Using the level you need to determine whether the floor is flat or not. If the difference in one meter is five millimeters or more, then before laying it is necessary to level the surface. For this, a mixture that aligns itself is suitable.
  4. You can not start work by immediately buying a laminate. He must lie down at home for two days. So he will get used to the temperature and humidity in the apartment.
  5. During operation, do not open windows or turn on the air conditioner so that there is no temperature difference.
    instagram viewer
  6. Laminate should be a continuation of the sun's rays that shine from the window. This is done so that the joints are not visible. The installation starts from the window and ends near the door. It is necessary to pay attention to one nuance: if glue is used to connect the laminate for reliability, then after laying it is impossible to walk on the floor for a day.
  7. Particular attention should be paid to the thickness of the substrate. Ideally, it should not be thicker than three millimeters. Otherwise, a thick substrate will cause the locks connecting the laminate to break.
  8. The substrate must be connected together by adhesive tape. Then there will be no bumps on the floor, and he will not creak.
  9. It is necessary to lay the laminate so that between it and the walls there is a distance of about eight to ten millimeters. To do this, insert wedges along all walls. Such a distance will not allow the boards to swell, because they will expand over time.
  10. Today, locks are used to secure the boards. They must be connected carefully, as they themselves are very fragile. If there is at least one small damage on the lock, the board needs to be changed.

If you know the secrets of the masters in laying laminate flooring, then each person will be able to lay a new floor at home.

/
/
/
/
/
/
  • Disadvantages of stone countertops for the kitchenDisadvantages of stone countertops for the kitchen
  • How to check whether a laminate floor is made of high qualityHow to check whether a laminate floor is made of high quality
  • What is the difference between acrylic enamel and acrylic paintWhat is the difference between acrylic enamel and acrylic paint
  • What is good about aluminum furnitureWhat is good about aluminum furniture
  • In which cases you can not put the brick one sideIn which cases you can not put the brick one side
  • Barrel on the wall in the dining roomBarrel on the wall in the dining room
  • Important Feng Shui Rules for Mirroring an ApartmentImportant Feng Shui Rules for Mirroring an Apartment
  • Brown and turquoise bedroomBrown and turquoise bedroom
  • Why you should not paint with a brushWhy you should not paint with a brush
  • What to do if the laminate bends when walkingWhat to do if the laminate bends when walking
  • Staircase lightingStaircase lighting
  • How to quickly install a roof from a profiled sheetHow to quickly install a roof from a profiled sheet

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
How to make a smooth crate of timber

How to make a smooth crate of timberWith Your Own Hands

One of the most common trends in modern repairs is wall cladding with a variety of finishing materials. This is very practical and allows you to eliminate a number of current problems at the same ...

Read More
How to make a child bed auto-swing mechanism

How to make a child bed auto-swing mechanismWith Your Own Hands

The device for swinging a children's bed can be made independently; it has a pendulum mechanism. The pendulum mechanism may be longitudinal or transverse. Longitudinal is designed to swing the bed...

Read More
How to make DIY powder

How to make DIY powderWith Your Own Hands

Nowadays, not a single housewife, but any person in general, can imagine their life without detergent. However, now far from all manufacturers make sure that their products are as safe as possible...

Read More