"Merry dog"

A coffee magnet toy in the shape of a dog will be a good gift. Such a gift will not only decorate the refrigerator, but also fill the house with a wonderful aroma of coffee and spices.

Materials (edit)

Attention! Earned on our website kitchen designer. You can get acquainted with it and design your dream kitchen for free! May also come in handy wardrobes designer.

1. Cotton fabric.
2. Sintepon.
3. White sewing thread and needle.
4. Brown oil paint.
5. Acrylic paints in white and black colors.
6. Brush.
7. Scissors.
8. Pencil or white pencil.
9. Magnet.
10. Red ribbon.
11. Bell.

To paint the toy, you will need the following components:

1. Water - 200 ml.
2. Black coffee - 1 pack.
3. Cinnamon - 10 g.
4. Vanilla sugar - 15 g.

Toy making process

1. First, we need a diagram of the Dog. This scheme can be enlarged or reduced to the desired size.

1. Cut out the Dog along the contour and apply the template to the fabric.

1. Use a simple pencil to outline the template. We make the second workpiece in mirror image.

1. We cut out both blanks. Along the contour of the blanks, we make a seam allowance.

1. We connect both blanks to each other with needles. In this case, the fabric without pencil lines should be inside.

1. Sew the details along the contour. At the bottom, in the area of ​​the legs, we leave a hole for further stuffing the toy with padding polyester.

1. We turn the product onto the front side.

1. We fill the toy with padding polyester and sew up the hole at the bottom with the outer seam.

1. Next, we proceed to coloring the toy. To do this, we brew aromatic coffee from the indicated components.

1. Coloring the Dog. To do this, we moisten the sponge in coffee and with stamping movements we pass over the entire surface of the toy.

1. We paint the Dog on both sides and leave to dry completely. You can dry the product both in the oven and in a warm room.

1. When the Dog is dry, you can start marking the exterior. For this we use a simple or white pencil.

1. Next, you need to draw all the outlines on the toy with brown oil paint. To do this, put paint on a sheet of paper and dip a brush into the paint. Then remove the paint from the brush in several movements. Then, with a light brown tint, we tint all the outlines on the toy.

1. We paint the ears and the spot on the back with brown paint.

1. We paint the nose with black paint, and the eyes with white paint.

1. Next, draw the pupils with black paint and draw all the contours.

1. We make white highlights on the nose and in the pupils. Draw a blush on the cheek.

1. The dog is ready and you need to make a collar for it. To do this, you need a ribbon and a bell.

1. We measure the tape in relation to the volume of the Dog's neck. Then we put a bell on the ribbon. We fix the tape on the neck of the toy.

1. A dog with a collar looks beautiful.

1. We attach a magnet on the back of the toy.

The "Funny Dog" toy is ready!