If the jigsaw leads to the side, this is often due to excessive pressure and high speed. But the reason may be different, for example, a poor-quality tool or the file itself. The most effective repair of jigsaws is associated with the installation of a guide. This and other ways to solve the problem are described in the article.
The content of the article
- Why does the jigsaw lead to the side
- How to solve a problem
Why does the jigsaw lead to the side
Before you start repairing a jigsaw, it is important to figure out exactly why the deviation occurs. This phenomenon is observed even in quite high-quality models, if during sawing the user applies too much pressure on the tool. This usually happens when the operator wants to get the job done as quickly as possible.
But along with this obvious reason, other factors may also appear:
- Poor-quality tool - if the model costs less than 3,000 rubles, it is probably not made well enough. Therefore, after several sawings, the jigsaw can lead to the side.
- Even many branded devices do not have a saw guide. But this reason can be completely eliminated if you gain enough work experience.
- Part too thick. If the workpiece is thin, the sawing goes almost perfectly, and if the "depth" is large, it is much more difficult to work. In this case, even a slight deviation from the perpendicular leads to the formation of an independent guide groove in the thickness. It is along this line that the cutting element will go, because of which the cut will be uneven.
- Another reason why the jigsaw leads away is the properties of the wood itself or another material. The part may be inhomogeneous, in places too hard and wavy, that is, with tortuous fibers that are arranged randomly. In this case, even the most powerful jigsaws can fail and go sideways.
- Even if the model is good enough, but the saw blade is of poor quality, the tool will periodically go to the side. Therefore, when choosing a file, you need to pay attention to the composition, geometry of the teeth, their sharpness and other indicators. You can navigate by labeling, brand and customer reviews.
How to solve a problem
One solution is to cut more carefully, with less pressure and without trying to move too fast. This gradually comes with experience and will help in the future.
On the other hand, if the wood has flaws, the part is too thick, even for a professional, the file can start to go to the side. Therefore, the main method is to purchase a jigsaw with a guide, such as the Festool PS 300 EQ-Plus.
You may also need a complete replacement of the file - they repair the jigsaw with their own hands, put a mechanism for holding the blade. For example, you can purchase a universal Line Master guide, which is suitable even for non-branded models. If the tool has a guide, you should purchase a new one and install it instead of the old one according to the instructions.
You can also collect it from improvised means, for example:
- metal ruler;
- straight rail;
- piece of plywood.
In this case, the repair of the Makita jigsaw or other models can also be done by hand:
- Draw a straight line.
- A distance retreats from it, which corresponds to the interval between the edge of the sole and the file.
- With the help of clamps, the guide is attached to the material.
- Start sawing by firmly holding the jigsaw so that the vibration does not affect the direction of the saw blade.
Thus, even a high-quality jigsaw can sometimes lead to the side. Moreover, the main, most effective way to solve the problem is to use a guide. It is also recommended to use a higher quality canvas, and not to exert extra effort during work.
