Dishwasher Indesit: instructions for different models and specifications - Setafi

The instructions for the Indesit dishwasher describe all the steps from installing the unit and selecting settings to loading dishes and actions after the end of the cycle. You can deal with them in a few minutes, the main condition is to act carefully and observe the dosage of detergents, as well as rinse aid. The main steps, as well as the technical parameters of the device, are described in detail in this article.

The content of the article

  • Main technical characteristics
  • Filling the tank with salt
  • Filling the rinse aid container
  • Program selection
  • Loading dishes and starting

Main technical characteristics

The instructions for the Indesit dishwasher indicate not only the rules of use, but also the main technical characteristics. They may differ depending on the model, however, average parameters can also be distinguished (for example, the DSG 2637 device):

  • dimensions of width and depth 45 * 60 cm, respectively;
  • height 85 cm;
  • control type electronic;
  • consumed electricity per 1.02 kWh;
  • noise figure 49 dB (normal conversation);
  • instagram viewer
  • volume of water consumed 10 l per 1 cycle;
  • type: freestanding;
  • capacity: designed for 10 sets of dishes;
  • energy class A (highly efficient);
  • total number of modes: 5;
  • number of temperature levels: 5;
  • condensation type drying;
  • delayed start time from 3 to 9 hours;
  • partial leakage protection system (excess water is retained by the body);
  • water temperature limit 60OWITH.
Dishwasher Indesit

All described parameters can be found in the instructions for the Indesit dishwasher. It is useful to familiarize yourself with some characteristics already at the first start. For example, depending on the degree of contamination and the size of the dishes, one or another mode is selected, and the optimum temperature level is also set.

Filling the tank with salt

After installing and connecting the device, the instruction manual for the Indesit dishwasher describes the process of filling the containers with the necessary means. First you need to put salt, and also pour rinse aid. The sequence of actions is as follows:

  1. At the first use, as well as when the indicator lights up, indicating the absence of salt (in the lower right corner), you need to find a special tank, which is located at the bottom.Filling the tank with salt
  2. To understand how to use the Indesit dishwasher, open its door and remove the lowest basket for dishes. Then find the container and turn its lid counterclockwise.
  3. If the unit is used for the first time, first pour water into the tank to the top. To do this, you can insert a funnel.
  4. Next, special salt is also poured in for the limit (about 1 kg). The instruction manual for the Indesit dishwasher involves the use of special preparations in the form of tablets or granules.
  5. The funnel is removed, if necessary, the surface is cleaned of salt grains and the lid is rinsed, then screwed on until it stops.
  6. Before setting the washing mode of the Indesit dishwasher, you must set the hardness level. It is determined depending on the data for the region. If they are not available, you can use special test strips or check how much foam the soap gives. If it lathers well, the water is relatively soft; if it lathers poorly, it is hard.

Filling the rinse aid container

In the next step, the Indesit dishwasher manual describes the process of filling the rinse aid container. To do this, you need to act like this:

  1. Open the dispenser cap by turning it counterclockwise (G).Open dispenser cover
  2. Then pour the required amount of rinse aid, but not more than the specified level.
  3. If part of the product is spilled, it is necessary to wipe the surface thoroughly.
  4. Close the lid.
  5. After the end of the wash, you can set the correct settings for the dispenser regulator (F). If there are white stains on the plates, it is put in position 1, 2 or 3. If spots appear or drops of moisture remain - 4 or 5. You can turn it with a screwdriver.

Program selection

Next, you need to select the Indesit dishwasher modes and load plates, bowls and other dishes. Almost all models are equipped with 5 programs that differ in purpose and other parameters:

  1. Normal (standard) washing is intended for daily use. The instructions for using the Indesit dishwasher indicate that in this case you need to pour 21 ml of detergent or put 21 g of powder.Loading dishes and starting
  2. Intensive mode is designed for very dirty dishes, including large ones (pots, pans). The main way how to use the Indesit dishwasher is to put the maximum amount of detergent (25 ml in liquid form or 25 g of powder). And you should not put more, otherwise strong foam will go.Lay out cutlery
  3. Pre-rinsing option - the instructions in Russian for the Indesit dishwasher indicate that in this case it is not necessary to put the product, since the dishes are processed only with hot water.Install it in the tray from above
  4. Ecological washing (Eco) - lay the maximum amount of funds (25 g or 25 ml), as described in the instructions for the Indesit dishwasher.
  5. The short cycle of the Indesit dishwasher is designed for a not very large number of plates, bowls (provided that they are not very dirty). Then you should put 21 g of powder or pour 21 ml of the product in liquid form.

Loading dishes and starting

Further, the instructions for the Indesit dishwasher describe the process of loading baskets and the actual launch. The basic rules are:

  1. Put the largest items in the bottom of the tray - wide dishes, pans, large lids, pots, etc.
  2. Arrange the cutlery in a special basket, as indicated in the instructions for the Indesit DSG 2637 dishwasher or another model.
  3. Install it in the pallet from above, as shown in the diagram (you can right or left)
  4. Before setting the Indesit dishwasher program, place small items in the upper basket, such as flat saucers, cups for tea, coffee, small salad bowls. This includes small pots and pans.
  5. Next, you need to figure out how the Indesit dishwasher works - set the desired mode and press the start button.

When the Indesit dishwasher mode is set, it will run for the specified time (for example, 2 hours 40 minutes). After finishing, it is recommended to inspect the dishes and, if necessary, adjust the amount of rinse aid. If foam comes out, it is necessary to remove it into a bucket or basin, and at the next start, pour less detergent.

Mini tractor for your farm: which one is better to buy, an overview of models - Setafi

Mini tractor for your farm: which one is better to buy, an overview of models - SetafiHomeTechniqueWalk Behind Tractor

creativecommons.orgThe content of the article1) Fighter T-152) Scout T-153) MTZ Belarus 132N4) Scout T-185) Rustrak R181) Fighter T-15The Chinese budget mini-tractor Fighter T-15 is designed for ag...

Read More
Do-it-yourself insulation of the attic ceiling: how and with what to insulate the second floor under the roof - Setafi

Do-it-yourself insulation of the attic ceiling: how and with what to insulate the second floor under the roof - SetafiRepairHome

Insulation of the attic ceiling is usually performed with expanded polystyrene or mineral wool. Since the attic is usually cold, laying is done in several layers. For this, a frame is constructed f...

Read More
Insulation of slopes and openings of plastic windows from the outside: how to make a finish - Setafi

Insulation of slopes and openings of plastic windows from the outside: how to make a finish - SetafiRepairHome

Insulation of slopes of plastic windows from the outside is usually done using expanded polystyrene or foam. Another option is to fill the cavities with mounting foam and then install the sandwich ...

Read More