RITMIX voice recorder: user manual and manual – Setafi

The Ritmix voice recorder allows you to keep both open and covert recording of a conversation, for example, during a meeting or an interview. In order for it to turn out to be of the highest quality, it is necessary to correctly configure and position the device. How to do this is described in the instructions for the Ritmix voice recorder, described in this article.

Battery installation and connection

The instruction for the Rhytmix voice recorder begins with a description of the process of installing batteries and turning on the device. The main steps are:

1. Be sure to turn off the voice recorder and do not turn it on until the installation of new batteries is complete.
2. Open the cover with the compartment where the batteries are inserted.
3. Insert them, observing the poles.
4. Close the lid.
5. Press and hold the "Play" button for a few seconds.
instagram viewer
6. When “On HOLD” appears, move the lock switch and turn on the recorder again
7. Set the time by pressing the "MENU" button.

How to record

The instruction for the Ritmix RR 150 recorder focuses on how to make a recording:

1. Press the "REPEAT" button enough times to select the desired folder.
2. Set the recording mode settings.
3. Select microphone sensitivity (high or low).
4. Designate the signal source (microphone or line input).
5. Choose whether voice recording is enabled or disabled.
6. Set up the recording mode - it can be a meeting or an interview.
7. Do a test recording for a few seconds to see how good it will sound.
8. Perform master recording (up to 99 total in each folder).
9. When the memory is full, you can see the notification “FULL” on the display. In this case, some of the files should be transferred to a computer or other device.

Different ways of recording

The recorder allows you to record in several ways - through a microphone, from an external source and record a telephone conversation.

Through the microphone

In this case, they act like this:

1. Press the "REPEAT" key several times and select the folder of interest.
2. Press the "REC" button.
3. Mark in the settings "V".
4. Place the device so that the microphone is as close as possible to the sound source.

From an external source

In this case, you will need external equipment, which is connected to the recorder using a cable according to the presented diagram.

The instruction is this:

1. Select INPUT and L (connect to line input).
2. Press the "REPEAT" key.
3. Select the folder where the file will be saved.
4. Press "REC" to start recording.

Recording a telephone conversation

The main steps are:

1. Connect the model to the phone using a USB cable and a special adapter according to the presented diagram.
2. Set the recording source in the menu and select "V".
3. Press "REPEAT" and select the appropriate folder.
4. Start recording with the "REC" button.

The recorder should be used only at positive temperatures, do not record outdoors in cold weather. It is also recommended to avoid dripping on the surface of the case. Thanks to this, the device will last a long time, and the recordings will be of high quality.