pump The use of Rune's pump challengeA simple and trouble-free pump Streamlet will provide water from a well and an open pond. All low-cost low-power pumps used in the country are made in Russia or in the post-Soviet space. Pumps are vibration, have no rotating parts, long service life, simple repair. Manufacturers of Pumps Trickle and Kid, their modifications
Before you buy a pump streamlet, you must familiarize yourself with the documentation and find out who the manufacturer is. In contrast to the legal apparatus, the replica has poorly compiled documentation, the design is different. Negative reviews on equipment left by buyers of fakes:
- Initially, 40 years ago, the production of vibration pumps was mastered in Belarus, in Lipetsk, where Olsa still operates today. The device streamlet is indispensable for installation in wells, due to the cylindrical body.
- In Russia, the submersible pumps the Streamlet Topol model are produced in Bryansk, Chelyabinsk. Zubr, a well-known chain saw manufacturer, has also mastered the production of pumps.
- Pump Kid - the model with the upper water intake is produced in Klimovsk, MO, Livny in the Orlov region, Bavleny in the Vladimir region.
- A pump with a lower fence called the Kid M, made in Klimovsk and Livny.
Energy nodes for all vibration pumps Malysh, Streamk are supplied from the Belarusian city of Mogilyov.
You can determine the manufacturer by address and name of the company. The passport lists warranty service points.
Mandatory to the pump casing attached molded nameplate with passport data. Chinese devices do not have such documentation, they are unreliable, they break in the first weeks of operation.
Read also: Pump Grundfos UPS 25 40 180 - how to distinguish the original from the fake
Technical description, models of low-power vibrating pumps
Vibrating pumps have a simple device without rotating nodes. The membrane discharge mechanism operates from an electromagnet connected to an AC line with a frequency of 50 Hz. The core of the electromagnet transmits vibrations, in the amount of 100 times / sec per pin, which causes the membrane to oscillate.
Membrane is the wall of the water chamber. The chamber has an opening for suction of water and a discharge pipe. When the chamber expands, the water is drawn in, then the check valve closes, and the fluid is squeezed out into the discharge pipe. And so 100 times per second. The user feels the vibration of the housing, for which the pump is called vibration.
You can increase or decrease the pump performance by adjusting the vibration amplitude, that is, the length of the pins driven by the core. For cushioning the connections are made with rubber products. With intensive work, they wear out and need to be replaced cuffs.
There are models with upper and lower water intake. At the same time, the upper fence provides good thermal protection for the energy system, and the lower one allows the system to be used when cleaning pits, with a low water level.
The basic models of the Stream Pumps did not have protection against overheating. Now, any vibration pumps are blocked "dry running" and from overheating. At the bottom of the water intake hole, a filter is necessarily installed to protect against sand, which is easily replaced.
Read also: Motoblock Salute to help the gardener
Pumps Kid M have the upper water intake, Kid-3 - the bottom, and Kid-K is used as a drainage. The pump overheats when operating for more than 2 hours. The break must be at least 20 minutes.
Belarusian Vibrating Pumps are produced with upper and lower water intake. There are a lot of modifications. Depending on the location of the suction, the following brands are produced: Stream B 10 - 40( the figure is the length of the supply cable), Stream N 10 - 40. Submersible pumps work in wells and boreholes.
Corporation Technopribor produces pumps Stream-1 with an upper water intake and Streamlet 1M with a lower suction. The devices are equipped with automatic switches, meet safety standards.
Technical indicators of pumps
Stream Of the vibration apparatus, the Streamlet outperforms other pumps in operational properties. The pump is adapted for work in wells and wells, it is lowered for the buildup of pools, flooded pits.
Pump characteristics The streamlet indicated in the passport:
- power consumption - 225 W;
- maximum depth of the lifting fluid - 80 m;
- pressure / flow rate - 20 m / 950 l / h, 30 l / 720 l / h, 40 m / 430 l / h;
- dimensions - height 300 mm, diameter 99 mm;
- cable length corresponds to the numbers in the label.
The general assembly of the submersible pump is made on the sealant. For contactless work with the walls of the well, damping rings are used.
Lower the device in depth on a nylon cable. The electric magnet in the case should always be under the bay for cooling with water.
Do not use a metal cable or wire for lowering. The metal does not dampen the vibration, possibly the destruction of the casing or the wire itself.
The advantages of membrane units
The choice of low-capacity pumps that work only during the warm season is justified for the dacha:
- the device is easy to maintain, maintainable and reliable;
- water, in contact with electromagnetic waves and beneficial for use;
- low price of the Streamlet pump due to production in the CIS, lack of customs duties;
- warranty on diaphragm pumps for 30 months subject to proper operation.
Read also: Rating the best models of gasoline mowers
Pumps Kid, Trickle of all modifications can be bought anywhere in the country. Order the device on the manufacturer's website. Delivery is carried out to the door.
The Stream Pump operates at a voltage of 220 V and is adapted to the conditions of domestic power supply. The device Baby should be connected only through the stabilizer. A short peak at 240 V will cause the magnet winding to fail.
Equipping the pump
The output hose should not be of small cross section, the additional load leads to the failure of the device. For connection use polymer or rubber hoses. If water is pumped into the pipeline, the connection to the pump is made with a hose at least 2 meters long.
The cable for lowering the pump deep into should be nylon, mounted in the lugs, according to the instructions. This is important when the insulation of the electric cable is broken, the pump is lifted using a non-conductive cable.
For pumps with a lower intake, you must use filters and thermal switches.
Features of the use of the pump streamlet - video
