Repair

Soundproofing the toilet, bath and water pipes in the apartment: how to do it yourself - Setafi Repair Home

Soundproofing a toilet in an apartment is achieved in 2 main ways - using materials that dampen sounds well, as well as by installing a box. The second method may seem simpler, besides, a well-made...

How to make a sawmill from a circular saw with your own hands? Pro tips - Setafi Repair Home

An electric sawmill is made on the basis of a ready-made device that needs to be installed on a structure with a countertop. It is assembled from metal pipes or a wooden box covered with laminated ...

Soundproofing interior partitions in an apartment: how to do it - Setafi Repair Home

Noise insulation of the partition can be performed both with the construction of the frame, and without preparatory work. The second option is simpler, but not as effective, and besides, it is only...

Insulation of the attic, attic with polyurethane foam: how to make and foam - Setafi Repair Home

Attic insulation with polyurethane foam (PPU) has great advantages, since it is one of the best materials in terms of protection against cold and noise. Even a small layer of 80 mm replaces 160 mm ...

Installation of partitions from tongue-and-groove slabs: how to lay blocks and fasten to the wall - Setafi Repair Home

Installation of partitions from tongue-and-groove plates (PGP) is carried out in several stages. First you need to prepare and level the surface of the floor and wall. Then a cork tape is glued on ...

Soundproofing the interfloor ceiling on wooden beams in the house: how to do it - Setafi Repair Home

Sound insulation of wooden floors is carried out by different materials that protect both from noise and from the cold. It can be mineral wool, fiberglass, polyethylene foam and others. The pros an...

Warm electric floor in the bathroom: how to do it, do you need waterproofing - Setafi Repair Home

The warm floor in the bath is done using a heating circuit, to which a sensor and a thermostat are connected to control the temperature. The work can be done literally in one day, but after that yo...

Installation of cast iron radiators: how to hang and connect with each other - Setafi Repair Home

The installation of cast-iron heating radiators is carried out independently with the appropriate experience. Moreover, the owners of apartments in an apartment building will first need to obtain p...

Do-it-yourself welding of polyethylene pipes: how to cook, technology - Setafi Repair Home

Do-it-yourself welding of polyethylene pipes is carried out using a soldering iron with a coupling. Surfaces must first be cleaned of dirt and grease stains. A full description of the process and c...

Roof insulation scheme: how to make a roof insulation device - Setafi Repair Home

The roof insulation scheme involves the installation of a heat-insulating material, its hydro- and vapor barrier, as well as the installation of a wooden counter-lattice to make the structure stabl...